National Enhance Technology Corp.

 Print this page

 

NL-230F

2Giga LAN over LRE Extender with DIP Switch

Ordering Information
NL-230F  2Giga LAN over LRE Extender with DIP Switch

 

  • OVERVIEW
  • FEATURES
  • SPECIFICATIONS
  • APPLICATIONS
  • DOWNLOAD

 

Product OVERVIEW

The Netsys' NL-230F is a 2 Giga LAN over LRE Extender with DIP switch that’s built in Long Reach Ethernet (LRE) UTP / Coaxial /Fiber Optic for data transmission via 10/100/1000BASE-T Ethernet cable (UTP) over LRE UTP/ Coaxial &1.25G/2.5G SFP Fiber modules. With DIP switch on rear side of NL-230F, it’s easy for customer to configure SFP Mode for 100M/1.25G/2.5G and LFP(Link Fault Pass-through) as well as 10/100/1000 Base-T Ethernet ports support isolation / non-isolation selection by DIP switch, etc. NL-230F support auto-negotiation & auto-MDIX to properly set up the most stable & fastest connection between NL-230F and the devices that connected to it. NL-230F support 2 x 10/100/1000 Base-T LAN over LRE 10 / 100Mbps Copper / Coaxial and 1.25G/2.5G fiber optic network, and small form-factor pluggable transceiver is required. NL-230F also supports 9K bytes jumbo frames pass-through which is perfect to utilize in AI, IoT, video streaming application, VOIP, etc. With high performance of data transmission and easy installation, NL-230F is suitable for ISP to build their FTTdp/FTTC/FTTB network and point to point application in more cost-effective way.

Easy Installation

The NL-230F may be installed on any level surface (e.g. a table or shelf or rail) that use bracket or DIN rail plate. The NL-230F supports plug-and-play installation and is fully compatible with all kinds of network protocols. Furthermore, user can watch the status of each individual port via the LED indicators.

 

FEATURES
  •  Support Multimedia interface converter such as copper wire / coaxial cable /fiber optic
  •  Supports 2 x 10/100/1000Base-T & auto –MDIX for RJ-45 port
  •  Support 1 x RJ45 / F-connector LRE Combo port
  •  Support single pair copper wire (RJ45 pin1 & pin2) by DIP switch setting
  •  Supports 1 x 1.25G / 2.5G SFP slot
  •  LRE UTP port support 10Mbps up to 800 meters / 100Mbps up to 500 meters / Coax port up to 500 meters (depend on RG59/U cable quality)
  •  Supports up to 9K jumbo frames
  •  Supports DIP switch for selecting 1000X/SerDes 1.25G, HSGMII 2.5G, SGMII 1.25G, SGMII 100M SFP slot mode & RJ-45 isolation / non-isolation mode
  •  Supports LFP (Link Fault Passthrough) function
  •  Built in surge protector for LRE port
  •  Supports DIN-Rail (Optional) / Wall Mounting / Bracket installation
  •  Matel case design with compact in size, easy installation
  •  Plug & Play
  •  Flexible application & installation
  •  

* Specifications are subject to change without prior notice.

 

Specifications
Standard Conformance
 Standard:  IEEE802.3 standard
 IEEE802.3u standard
 IEEE802.3z standard
 Regulatory Compliance:  FCC
 CE
 RoHS compliance

 

 Hardware Specifications
 Physical Interface:  2x RJ-45 10/100/1000Mbps auto-negotiation Ethernet port
 1 x SFP slot
 1 x F-connector
 1 x DIP switch
 1 x DC power jack
 Cabling Requirements:  Ethernet: 10/100/1000Base-T Cat.5 or above UTP Cable
 Fiber Optic: Flexible (Depending on Fiber Transceiver)
 Coaxial: RG59/U
 SFP Modes:  1000X/SerDes, HSGMII 2.5G, SGMII 1.25G, SGMII 100M
 LED indication:  Power LED
 LAN1/LAN2: Link/ACT, 1Gbps, 100Mbps
 SFP slot: Link, 2.5G, 1.25G
 L10M / L100M : LRE 10M /100M / Link/Active
 Power Requirement:  Input : AC 100~240 volts/50~60Hz
 Output : DC 12V/1A(Commercial-grade Power Adapter)
 Typical Power Consumption:  1.6W
 Jumbo Frame:  9K bytes
 Optional accessories:  Din Rail mounting plate
 Operating Temperature:  0°C~ 50°C (32°F ~ 122°F) Fanless, free air cooling
 Storage Temperature:  -20°C ~ 70°C (-4°F ~ 158°F)
 Humidity:  10 to 90% (non-condensing)
 Net Weight:  0.35 kg
 Dimensions:  124 x 93 x 27 mm (4.88" x 3.66" x 1.06")

 

* Specifications are subject to change without prior notice.

 

APPLICATIONS

 

LAN Distance Extension

NL-230F supports 9K bytes jumbo frames pass-through which is perfect to utilize in AI, IoT, video streaming application, VOIP, etc. With high performance of data transmission and easy installation, NL-230F is suitable for ISP to build their FTTdp/FTTC/FTTB network and point to point application in more cost-effective way.

 

 

 

DOWNLOAD
Release Date File Version Download
 May, 2024  Datasheet  N/A
 May, 2024  User's manual  A5

Welcome to Netsys

As the world’s number one source for the fastest VDSL and G.fast Ethernet extenders, Netsys was created to bring you the finest quality broadband solutions. Offering the fastest speeds and longest distances, Netsys Ethernet extenders are the ultimate high-speed, long-range solutions for any application. Whether you’re looking for a new Ethernet extender, Ethernet over coax solution, VDSL solution, or a new G.fast solution, we have a wide selection of superior-quality products for your needs. If you’re not sure which Ethernet extender is best for your application, our expert staff is standing by to answer any questions you may have.

The best solutions to meet your needs

To bring full satisfaction to our customers, we will continue to strive to develop reliable, better performance, and environmental friendly products. Let us networking your world.

Long Reach LAN Extender solution

Netsys Long Reach solution consists of NV-202 which allows your IP network infrastructure to be deployed flexibly anywhere at long range. It is designed to extend Ethernet transmission over any existing twisted-pair cable or telephone wires for distances up to 3,000m (9,843ft) into any point to point applications.

Last Mile solution

Netsys Last Mile Transmission solution provides VDSL2 for various applications. Netsys CO equipment and CPE devices enable long distance IP Surveillance deployment and many Multi-Media services to realize on local high speed Internet.

Industrial-Grade solution

Netsys Industrial LAN Extenders solution offers high reliability and security to ensure continuous industrial operation in harsh environments such as factory floors, outdoors, ITS (Intelligent Transportation Systems) and at extreme temperatures. The Industrial Ethernet upgrades traditional, proprietary factory-floor networks to a low-cost, high-performance, and scalable architecture.