National Enhance Technology Corp.

 Print this page

 

NV-202

VDSL2 LAN extender

Ordering Information
NV-202  VDSL2 LAN extender

 

  • OVERVIEW
  • FEATURES
  • SPECIFICATIONS
  • APPLICATIONS
  • DOWNLOAD

 

Product OVERVIEW

The NV-202 is a low cost LAN extension solution using the G.993.2 VDSL2 standard technology and providing up to 100Mbps symmetric using only a single copper wire pair. Designed specifically or a LAN to LAN extension and supporting both symmetrical and asymmetrical transmission at up to 100/100Mbps within 300 meters and 5/1Mbps at 3000 meters, this is a perfect solution to extend LAN to buildings, hotels, hospitals or any location outside of the 100 meters reach of Ethernet UTP.

Flexible Configuration

The NV-202 supports both central office (CO) and customer-premises equipment (CPE) modes selectable through DIP Switch. Customers can do the configuration for different needs adjustment. PIN1 ON of DIP Switch is CO side, PIN1 OFF of DIP Switch is CPE side.

 

Interleave delay support

Interleave delay function is used in digital data transmission technology to protect the transmission against noise issue and data error.If during transit more than a certain amount of data has been lost then the data cannot be correctly decoded. Short bursts of noise on the line can cause these data packets to become corrupt and the bridge has to re-request data which in turn can slow down the overall rate at which data is transmitted. Interleaving is a method of taking data packets, chopping them up into smaller bits and then rearranging them so that once contiguous data is now spaced further apart into a non continuous stream. Data packets are re-assembled by your lan extender.

Easy Installation

The NV-202 may be installed on any level surface (e.g. a table or shelf or rail) that use bracket or DIN rail plate. The NV-202 supports plug-and-play installation and is fully compatible with all kinds of network protocols. Furthermore, user can watch the status of each individual port via the LED indicators.

Automatic Bandwidth detection

The NV-202 supports band profile 17a and 30a, it can automatically detect the cable length and bandwidth depending on the distance to the configuration. The maximum bandwidth is symmetric bandwidth of 100Mbps / 0.3 km.

 

FEATURES

  •  Supports RJ-11/Terminal Block combo for Line port (Annex A)
  •  Supports high bandwidth up to 100Mbps symmetric over Line ports
  •  Supports long reach mode up to 3 km with 24 gauge phone wire
  •  Supports auto speed for Line port and Interleave mode selectable through CO side DIP switch
  •  DIP switch with CO and CPE mode selectable
  •  Supports long packet size up to 1536 bytes
  •  Supports Surge protection
  •  Supports wall mounting
  •  Supports DIN-Rail mount installation (Optional)
  •  Compact size and metal case design
  •  Supports point-to-point applications
  •  

* Specifications are subject to change without prior notice.

 

Specifications

Standard Conformance
 Standard:  IEEE802.3 standard
 IEEE802.3u standard
 ITU-T G993.2 VDSL2 standard
 Regulatory Compliance:  FCC
 CE
 RoHS compliance

 

 Hardware Specifications
 Physical Interface:  2 x RJ-45 10/100Mbps auto-negotiation Ethernet port
 1 x RJ-11/Terminal Block connector for VDSL2 line port
 1 x DIP Switch
 1 x Power Jack
 Cable Connections:  RJ-45 (Ethernet): Category 3~7 UTP/STP
 RJ-11 (VDSL2): 24AWG with twisted Pair phone wire
 LED indication:  1 x Power LED
 2 x Link/Active Status for Ethernet port
 1 x Link LED for VDSL2 line port
 1 x CO Mode indicator LED
 1 x CPE Mode indicator LED
 Power Requirement:  Input Voltage: 12VDC / 1A (Commercial-grade Power Adapter)
 Typical Power Consumption:  5W
 VDSL2 Line Code:  Discrete multitone (DMT) modulation
 VDSL2 Transmission Mode:  Packet Transfer Mode (PTM)
 Operating Temperature:  0°C~ 50°C (32°F ~ 122°F) Fanless, free air cooling
 Storage Temperature:  -20°C ~ 70°C (-4°F ~ 158°F)
 Humidity:  10 to 90% (non-condensing)
 Net Weight:  approx. 0.34 kg
 Dimensions:  95 x 110 x 27 mm (3.74" x 4.33" x 1.06")

 

* Specifications are subject to change without prior notice.

 

APPLICATIONS

 

LAN Distance Extension

Two NV-202 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect the maximum data rate of 100Mbps and up to 3km distance support. It is easy-to-use which do not requires installation of additional wiring. Every modular phone jack in the home can become a port on the LAN.

 

Proper Installation: Train & Metro Stations,Boat and Submarine,Parking system,Weather station,Amusement park,Farm,Jail & Oil Refinery,Telecom.

 

External Splitter

When you need to use Ethernet and simultaneously use the telephone, You can choose the suitable external splitter in the local. It can be easily installed in the NV-202.

 

 

DOWNLOAD

Release Date File Version Download
 Feb, 2013  Datasheet  N/A
 Jan, 2022  User's manual  A6
 Mar,2015  Performance Table  B1

Welcome to Netsys

As the world’s number one source for the fastest VDSL and G.fast Ethernet extenders, Netsys was created to bring you the finest quality broadband solutions. Offering the fastest speeds and longest distances, Netsys Ethernet extenders are the ultimate high-speed, long-range solutions for any application. Whether you’re looking for a new Ethernet extender, Ethernet over coax solution, VDSL solution, or a new G.fast solution, we have a wide selection of superior-quality products for your needs. If you’re not sure which Ethernet extender is best for your application, our expert staff is standing by to answer any questions you may have.

The best solutions to meet your needs

To bring full satisfaction to our customers, we will continue to strive to develop reliable, better performance, and environmental friendly products. Let us networking your world.

Long Reach LAN Extender solution

Netsys Long Reach solution consists of NV-202 which allows your IP network infrastructure to be deployed flexibly anywhere at long range. It is designed to extend Ethernet transmission over any existing twisted-pair cable or telephone wires for distances up to 3,000m (9,843ft) into any point to point applications.

Last Mile solution

Netsys Last Mile Transmission solution provides VDSL2 for various applications. Netsys CO equipment and CPE devices enable long distance IP Surveillance deployment and many Multi-Media services to realize on local high speed Internet.

Industrial-Grade solution

Netsys Industrial LAN Extenders solution offers high reliability and security to ensure continuous industrial operation in harsh environments such as factory floors, outdoors, ITS (Intelligent Transportation Systems) and at extreme temperatures. The Industrial Ethernet upgrades traditional, proprietary factory-floor networks to a low-cost, high-performance, and scalable architecture.